Parchettificio Toscano

Formats

QUADROTTA FORMAT

PATTERNED FLOORING

Thickness: mm 15/30
Width: mm 800/1000
Lenght: mm 800/1000
Installation: glued

The flooring designed using the “Quadrotta” models have a thickness between 15 to 25 mm depending on the type of wood required and are created as two layers (for styles including marble the thickness is approx 30 mm). The visible stratum is made up of a nominal 4 mm of hardwood (greater thickness are available on request but only for some types of wood) while the underlying layers are made with plywood. The outer edges are all pre-prepared with slots for creating a biscuit joint, guaranteeing (once installed) an excellent leveled surface between the tiles. The size of the panel change according to the wood type selected (from 800 x 800 mm to 1000 x 1000 mm approx.). We can create other formats on request.

COMPONIBILE FORMAT

PATTERNED FLOORING

Thickness: mm 15
Width: the dimension vary according model and essence chosen
Lenght: the dimension vary according model and essence chosen
Installation: glued

The flooring designed using the “Componibile” models are created with a 3 layer structure of a 15 mm thickness (greater thicknesses are available on request). Each single component of the design has an interlocking perimeter and biscuit jointing for ease of assembly. We produce other formats on request.

CHEVRON FLOORING

Chevron flooring can be laid with connecting angles ranging from 30° to 45°, using any of the formats from our product range (single plank, multi-layer and solid hardwood). Consequently, the width and length varies depending on the choice and may in any case be customised. The longer edges of the slats have interlocking tongues and grooves, while the shorter edges have interlocking biscuit inserts that maintain flooring flat and perfectly in position during assembly.

HERRINGBONE FLOORING

Herringbone layouts are created using any products available in plank format (single plank, multi-layer and solid hardwood). Consequently, the width and length varies depending on the choice and may in any case be customised. The longer edges of the slats have interlocking tongues and grooves, while the shorter edges have interlocking biscuit inserts that maintain flooring flat and perfectly in position during assembly. Herringbone flooring can be decorated with inlay borders and dividing strips in any type of wood on request.

TRIPLE-LAYER SINGLE PLANKS

Total thickness: mm 15/21
Thickness of hardwood: mm 4/6
Width: mm 70/330
Length: mm 1000/2500
Type of fitting: glued/floating/nailed

Triple-layer single planks are composed of three bonded layers; the top or surface layer is a fine quality wood, 4/6 mm thick; the intermediate layer is composed of a soft-wood cross-ply, and the bottom layer may be composed of either the same wood as the surface, or alternatively, a lesser quality wood (the counterbalance layer varies according to the type of wood selected. The particular feature of the triple-layer version is that it can be glued to the sub-flooring or laid as floating floorboards. When fitting a floating floor, a fine foam underlay (generally 2-3 mm thick) is laid between the floor surface (screed) and the floorboards. In this way, the boards are positioned on the underlay and are glued along the tongue and groove joins only. Whatever laying technique is used, raw wood must be treated with a finish very rapidly. Sizes of the various formats vary according to the wood type selected. We produce other formats on request. The various layers are assembled using adhesives that are perfectly compliant with current UNI EN regulations controlling formaldehyde emission.

DOUBLE-LAYER SINGLE PLANKS

Total thickness: mm 14/15
Thickness of hardwood: mm 4
Width: mm 140/235
Length: mm 1200/2000
Type of fitting: with adhesive

The double-layer single boards are composed of a 4 mm oak surface layer and an underlying 11/12 mm phenolic, multi-layer birch cross-ply. This structure permits the possibility of laying much larger floorboards, guaranteeing good board flexibility and easy assembly. Whatever laying technique is used, raw wood must be treated with a finish very rapidly. Sizes of the various formats vary according to the wood type selected. We produce other formats on request. The various layers are assembled using adhesives that are perfectly compliant with current UNI EN regulations controlling formaldehyde emission.

MINI PLANK

Total thickness: mm 10/14
Thickness of hardwood: mm 4
Width: mm 120/140
Length: mm 900/1500
Type of fitting: with adhesive

Flooring with mini planks is composed of one surface layer in fine quality wood with a nominal thickness of 4 mm and an bottom layer in phenolic birch plywood with a thickness of 6 mm, which is in turn made up of several layers of cross-ply. Mini planks must be glued to the sub-flooring. It is supplied raw and must be treated with the surface finish very rapidly. Sizes of the various formats vary according to the wood type selected. We produce other formats on request.

SOLID WOOD PLANKS

Total thickness: mm 14/22
Width: mm 120/200
Length: mm 500/2400
Type of fitting: glued/nailed

Solid wood planks retain their charm over time. In the Pontevecchio range, the particular details and the possibility to fit pre-finished planks, combines ease of installation and the typical practical aspects of layered planks with the robustness and durability of solid wood. We produce several formats with thicknesses between 14mm and 22mm; naturally, the greater the thickness the greater the length and width. The planks with a thickness of 14mm need to be glued while those with a thickness of 22mm have to be nailed. Slight differences in width and thickness should not be considered a defect as this product is handcrafted. Whatever laying technique is used, raw wood must be treated with a finish very rapidly. Sizes of the various formats vary according to the wood type selected. We produce other formats on request.